Showing posts with label Mould. Show all posts
Showing posts with label Mould. Show all posts

Wednesday, January 17, 2024

Boho Twist

 

The title of this piece – Boho Twist – is partly taken from the theme of Tres Jolie’s January Mood Board challenge and partly from all of the twists and turns that my project took to completion.


I was immediately inspired by the colors and images that Kim supplied: the blues and browns and peaches make a beautiful combination and I just love the bottom images of lights and flowers and hangings. But the idea in my head was mostly a canvas with a damask type texture and a mixture of colors created by applying layers of acrylic paint.

I started by digging out several items from my stash: a round canvas, a very loved Prima stencil and a Finn Mould that I’ve used before.

I used Paper Texture Paste through the stencil to duplicate the pattern of one of the papers that were included in the January Kit.

While that was setting, I poured resin into a few of the Mould images and put it aside.

Next, I fussy cut the section that I had chosen from that patterned paper and inked the edges.

I selected a few Finn Acrylic Paints, poured a few drops of each into a palette tray and thinned them with water. As I applied these to the canvas, I used a spray bottle to water them down, using my heat tool to dry them as I went along. Next, I covered the entire canvas with watered-down white gesso to tone down the colors, again drying as I went along. One more layer of varied acrylics, one more layer of gesso and I was done.

The Mould pieces were now set. I coated them with gesso to give them “teeth” and then with watered-down Burnt Sienna acrylic paint.

I selected a chipboard piece that came in the kit and covered it with Distress Oxide ink. The resulting color wasn’t what I had in mind, so I tried applying some of the acrylic left from treating the Mould pieces. This came out much darker than I had intended, so I covered it all with gesso and dried it with the heat tool, causing it to bubble up in spots. I decided that “I meant to do that!” as it did add a little texture here and there.

I was ready to begin assembling my composition.

I glued the chipboard piece to the top of the canvas and then started to add the fussy cut piece. This was going to result in too much canvas, so I selected a few bits of ephemera, inked the edges, and glued them as a cluster to a piece of packaging. Somehow, I wasn’t satisfied, so I created one more ephemera cluster to dangle from the bottom.

I selected more ephemera pieces to layer under the flowers on the sides, inked the edges and added packaging to the bottoms to create dimension. I took one look at the chipboard piece and realized that the color was too bright. I dabbed it with more of the Oxide Ink and finally achieved the soft brown that I wanted all along.

I had planned all along to add seam binding streamers to reflect the flow of the pattern of the paper. I cut them to about 18 inches, doubled and knotted them before gluing them down. I created my last flower cluster over the knots.

I finished my project by gluing my light bulb pieces here and there and declared it “finished”.

A few closeups:





 

***************************************************

 *****Supplies*****

 ***Paper***

Prima – Bohemian Heart Paper Pad #664121

***Embellishments***

Prima Marketing – Bohemian Heart Collection – Ephemera #664169

Prima Marketing – Bohemian Heart Collection – Flower Embellishments – Blue Lagoon #668297

Prima Marketing – Bohemian Heart Collection – Flower Embellishments – Wild at Heart #668327

Tres Jolie – Laser Cut Chipboard – Split Mandala

My Scrap Cabin – Hand Crinkled Seam Binding – Arctic

My Scrap Cabin – Hand Crinkled Seam Binding – Mink

My Scrap Cabin – Hand Crinkled Seam Binding – Parasol

***Mediums***

Prima – Finnabair – Art Extravagance – Paper Texture Paste #965259

Prima – Finnabair – Art Basics – Heavy Gesso – White #961442

Prima – Finnabair – Art Alchemy – Liquid Acrylic Paint – Burnt Sienna #967222

Prima – Finnabair – Art Alchemy – Liquid Acrylic Paint – Carmine #967253

Prima – Finnabair – Art Alchemy – Liquid Acrylic Paint – Ultramarine #967291

Prima – Finnabair – Art Alchemy – Liquid Acrylic Paint – Deep Turquoise #967307

Prima – Finnabair – Art Alchemy – Liquid Acrylic Paint – Prussian Blue #968250

Prima – Finnabair – Art Alchemy – Liquid Acrylic Paint – Coral #968274

Ranger Ink – Tim Holtz – Distress Oxide Ink Pad – Gathered Twigs #TDO56003

***Tools***

Prima – Finnabair – Imaginarium – Moulds – Vintage Light Bulbs #969578

Prima – Stencil – Flourish #564278

***Other***

IVON – Round Canvas 8”

Alumilite – Amazing Resin

 ***************************************************

As always, I want to thank you for peeking into my blog; your visits mean a lot to me.

 

Monday, June 26, 2023

(Feels Like) Armageddon

 

The wildfires in Canada have been unusually severe this year; the smoke has been traveling hundreds of miles south into the United States and east into Europe. A few weeks ago, the air in large parts of the Northeast turned orange and the atmosphere was deemed extremely hazardous. This is a view of New York City the afternoon of June 6.

In the meantime, I had received my June kit from Tres Jolie, containing a lot of ingredients for masculine projects and a Mood Board Challenge with a Steampunk theme. I decided that this would be a perfect chance to scrap this event.


This was an easy page to put together. The patterns of the 3 Quarters Designs Vintage Men collection are so filled with images and textures that little needs to be done as far as embellishments go.

After selecting my base, I cut up another sheet to form layers. I tore some of the edges using a tear guide, then inked them all around. The photo and the layers were each backed with USPS packaging to give them some depth, then glued down.

My basic embellishment was the pair of chipboard gears from Tres Jolie that came in the kit; I also used one of the gears and two of the wings from the Finnabair packages. I finished it off with a few clay pieces from my stash that were coated with black gesso and then with metallic wax.

A few closeups:


***The wildfires are still ongoing, especially in the Quebec province. I’ve been keeping our Canadian neighbors and all of those who are working to control and put them out in my prayers. ***  

***************************************************

 *****Supplies*****

 ***Paper***

    3 Quarters Design – Vintage Men Collection

***Embellishments***

    Prima Marketing – Finnabair – Mechanicals – Metal Embellishments – Winged #962432

Prima Marketing – Finnabair – Mechanicals – Metal Embellishments – Steampunk Gears #963453

        Tres Jolie Kits – Chipboard – Steampunk Border – Black

***Mediums***

Prima – Finnabair – Art Basics – Heavy Gesso – Black #961459

Prima - Finnabair – Art Alchemy – Metallique Wax – Aged Brass #963965

Ranger Ink – Tim Holtz – Distress Archival Ink #AMPK77947

***Tools***

Prima – Finnabair Collection – Moulds – Rusty Pipeline #968601

Prima - Finnabair Collection - Moulds – Vintage Light Bulbs #969578

We R Makers – Basic Tools – Tear Guide #660082

***************************************************

As always, I want to thank you for peeking into my blog; your visits mean a lot to me.

 

Friday, February 17, 2023

A Spoonful of Love

 

I’ve been wanting to get back to mixed media for a while, and Dawna’s Mixed Media Challenge over at Scrapbook.com has been the perfect opportunity. I’ve raided my stash for all the materials and mediums to create a vintage-type canvas with lots of mechanical elements for the Valentine’s Day season.


 I started by adhering the tissue paper to a 9” x 12” canvas, using matte gel medium to glue it down and then on top to seal it. I ran an archival ink pad around the edges to give it some definition.

When it was absolutely dry, I added some texture by running paper texture paste through a stencil.

While this was setting, I made a few heart and mechanical embellishments using a Finnabair mold and cast resin. I selected a few metal embellishments and a bit of lace to add to my piece.

I started with the lace, cutting a few pieces, and adhering them to the center and arranging them to create the basic flow of the design. Next, I glued down the spoon and then I began to add resin and metal pieces here and there until I was satisfied with the results. I filled in some gaps and added a bit of interest with art stone. (I used matte gel medium as my adhesive; it works with any and all surfaces.) I covered all the components with white gesso. This does double duty, sealing all porous surfaces and adding “teeth” to the smooth ones.

Time to add a little color! I started with the Butterfly Spells acrylic, painting it here and there and spraying it so that it would lightly run down the canvas, using my heat tool to set it. I repeated this step, using the French Lavender shade, then going over and over my piece, alternating the paints, until everything was covered. Next, I watered down some Burnt Sienna paint until it had a consistency of a thick ink and lightly spread it over my assemblage to tone down the colors and give it a shabby look.

I finished my canvas by adding a little bit more of water to the paint and, with the aid of a fan brush, applied splatters over the entire surface.

 

***************************************************

 

*****Supplies*****

 

***Paper***

Prima – Finnabair – Decorative Paper – Romantic #968090

***Embellishments***

Prima – Finnabair – Embellishments – Mechanicals – Metal Blooms #968496

Prima – Finnabair – Embellishments – Mechanicals – Grungy Gears #968519

Prima – Finnabair – Embellishments – Mechanicals – Tin Hearts #963361

Prima – Finnabair – Embellishments – Mechanicals – Machine Parts #967109

Prima – Trims – Magnolia #583019

Reneabouquets – Drop Leaf Lace - White

***Mediums***

Ranger – Distress – Archival Ink – Ground Espresso #AMPK77947

Prima – Finnabair – Art Basics – 3D Matte Gel #961398

Prima – Finnabair – Art Basics – Heavy Gesso – White #961442

Prima – Finnabair – Art Extravagance – Paper Texture Paste #965259

Prima – Finnabair – Art Ingredients – Art Stones – White #963705

Prima – Finnabair – Art Alchemy – Acrylic Paint – Sparks – Butterfly Spells #964122

Prima – Finnabair – Art Alchemy – Acrylic Paint – Metallique – French Lavender #967796

Prima – Finnabair – Art Alchemy – Liquid Acrylic – Burnt Sienna #967222

***Tools***

Prima – Finnabair – Stencil – Victorian Tiles #968946

Prima – Finnabair – Imaginarium – Steampunk Hearts #969448

***Other***

9” x 12” Canvas

Alumilite – Amazing Casting Resin - White

 

***************************************************

As always, I want to thank you for peeking into my blog; your visits mean a lot to me.